This inertia switch is a must have for any conversion. It is commonly placed on your ignition circuit so that in a collision, this switch will open and turn off your ignition automatically. to ensure the switch is set, simply press the red button in. The typical connectors included with these do not work well, and we have found they do not make a solid connection. We have instead removed them, soldered wires directly to the pins, and sealed the connector area. This ensures you get the best connection and have no issues.
This switch is meant for low current, so avoid any large loads. 1 amp is the max continuous current that should flow through this switch. It is recommended to always use an ignition relay so that your ignition circuit currents are all signal level. For more info, please contact us for assistance.