Systems Control Module 2 (SCM2)
The Product Overview document is now located in the beginning of the manual that can be downloaded below.
General Overview: The SCM is a centralized control module designed to save countless hours of time and effort while providing a clean factory look. It controls almost all aspects of your electric vehicle’s (EV) 12V system, and the way it interfaces with various high voltage (HV) components. The SCM is a great solution that simplifies the overall wiring of the vehicle.
Compatibility: The SCM is designed to be used with the popular EV conversion setup employing the HyPer 9 AC drive system by NetGain Motors, Orion BMS 2 by Ewert Energy Systems, TC/ElCon Battery Charger, TC/ElCon DC/DC, Hawkeye 6.6kW + 1.2kW Charger/DCDC Combo. All of these products are systems we sell and are available. For more information on compatibility and options, please contact us.
Base model features:
- DC/DC Converter control
- CAN Bus Hub
- 12V Battery Watchdog Circuit
- Controller Enable Logic Control
- Hawk-IoT Telematics Compatible
- Controller Ignition Relay
- Intelligent coolant pump control
- Coolant pump PWM control
- Intelligent cooling fan control
- Power brake/Power steering Signal Control
- Deceleration Light Output (experimental feature)
Optional add-on modules:
- 5kW Battery Preheater module.
- 5kW Cabin Heater module.
- A/C Kit (for cabin cooling and battery chilling) with smart speed control.
SCM2 includes 4ft length harnesses.
All of the latest documentation can be found below and is available for download in PDF format. Please review all SCM documentation before ordering.
The SCM enclosure is approximately 10x6 inches and 3 inches tall.
By ordering the Systems Control Module 2 (SCM2), you agree and acknowledge the disclaimer listed in the Manual that can be downloaded below.
SCM Documentation
| SCM2 Manual rev04 (units purchased before October 1st, 2024) |
| SCM2 Manual rev05 (units purchased after October 1st, 2024) |
| EV Conversion Schematic with SCM2 v2.02 (X1 Controller) |
| EV Conversion Schematic with SCM2 v2.02 (X144 Controller) |
Hawkeye Innovations LLC
SCM manuals and schematics can change and be updated at any time without notice. Except for Hawkeye Innovations, LLC’s express warranties, if any, set forth in the manual regarding the Systems Control Module (SCM) located at https://www.hawkeyeinnovationsllc.com/store/p18/Systems-control-module.html , Hawkeye Innovations, LLC, makes no representations or warranties whatsoever with respect to the SCM, including but not limited to any warranty of merchantability, warranty of fitness for a particular purpose, or warranty against infringement of intellectual property rights, whether express or implied by law, course of dealing, course of performance, usage of trade, or otherwise. Hawkeye Innovations, LLC, has no control of third-party installation or use of the SCM. Accordingly, Hawkeye Innovations, LLC, assumes no liability for vehicle functionality or safety during or after third-party installation of the SCM. Additionally, Hawkeye Innovations, LLC, assumes no liability for any damage caused to the vehicle or the SCM as a result of installation of the SCM. Hawkeye Innovations, LLC, assumes no responsibility for this product in any use. SCM documentation can be updated at anytime without notice.