3/8" Nylon Elbow Fitting
This is a high quality Nylon Elbow fitting that we use and recommend to construct a coolant manifold for the Tesla Modules. This barbed fitting works perfect with the 3/8" ID blue silicone heater hose as recommended in the 'Cooling System' section of our DIY Guide (link for purchase in the guide).
For example, a 5 port manifold can be constructed by using: (please see product photo for example)
-4x Tee fittings
-1x Elbow fitting
Note: You will need a manifold on the coolant input side, and another on the coolant output side. Please see our DIY Guide for more details and diagrams.