EV Conversion Kit
The kit also includes our online EV Conversion Course - $749 value, and 5 hours of project consulting/support - $750 value!
This high quality EV conversion kit includes many components to make this a very intuitive setup. At the heart is our SCM2, which greatly simplifies the wiring and install for any first time or experienced installer.
Available add-ons can enhance your build with OEM-like thermal management and cabin HVAC. Charging is fast and simple with our Hawkeye Innovations 6.6kW combo DCDC/charger.
Centered around the HyPer 9 motor, this kit is ideal for vehicles about 3,500 lbs and under when using a transmission, and makes about 125HP and 172 ft lbs of instant torque!
Please contact us first to make sure we get the kit tailored to your application if needed. Prices do not include shipping. If you are interested in a complete kit with cable, hose, fittings, and other small pieces, please contact us.
This kit does not include motor adapter kit or batteries.
Please contact us to order.
The following items are included in the kit:
Components:
- 1x HyPer 9 Motor
- 1x HyPer 9 Controller
- 1x HyPer 9 Contactor
- 1x HyPer 9 Wiring harness
- 1x HyPer 9 Motor cradle
- 1x HyPer 9 Throttle pedal
- 1x TC 3.3kW +1kW Charger/DCDC combo
- 1x Orion BMS 2 Kit (12 ft cell tap harness)
- 1x SCM2 (simplifies all wiring and installation, efficient diagnostics with central logic control)
- 1x CAN Bus display kit (touch screen shows battery, motor, and controller data)
- 1x CAN Bus display face-plate
- 1x Hawk-IoT WiFi module (includes mobile app)
- 1x Coolant pump kit
- 1x Coolant pump mount kit
- 1x Radiator with fan assembly
- 1x New and improved HyPer controller chill plate
- 1x J1772 Port with 1.5M cable
- 1x HV Disconnect
- 1x HV Disconnect gasket
- 1x HV Fuse
- 1x HV Fuse holder
The kit also includes our online EV Conversion Course - $749 value, and 5 hours of project consulting/support - $750 value!
---------------------------
Optional Charging Upgrade:
- Upgrade to the Hawkeye 6.6kW +1.2kW charger/DCDC combo that is liquid cooled and compatible with the Hawk-IoT wifi module. (Battery chiller kit or separate cooling loop for the charger recommended with any liquid cooled 6.6kW charger)
Optional SCM2 Add-Ons:
- Electric A/C Kit, includes the electric compressor and controller. Works with the SCM2, with data available through the Hawk-IoT mobile app. Compressor speed is adjustable via a knob. Other basic A/C components, A/C hoses/fittings are not included since they are dependent on application.
- Battery Chiller Kit, includes our custom heat exchanger and A/C expansion valve/solenoid. This gets installed into your A/C system to build a 'split' system. The SCM2 will activate the solenoid to be able to chill the batteries only whenever necessary.
- 5kW Battery Preheater Kit, includes the maximum 5kW compact fluid heater and controller, with data available through the Hawk-IoT mobile app. Uses the SCM2 for automated preheating before charging and when discharging in cold temperatures. Heater power is adjustable via a knob.