EV Conversion Kit Builder
SKU:
$24,134.70
$24,134.70 - $30,284.70
per item
This high quality kit is both extensive and intuitive, and will help you create a conversion that is factory-like. Available add-ons can enhance your build with OEM-like thermal management. It includes everything you need to convert your car to electric except for the motor adapter kit (contact us for this). Centered around the HyPer 9 motor, this kit is ideal for vehicles about 3,500 lbs and under when using a transmission, and makes about 125HP and 172 ft lbs of instant torque!
Please contact us first to make sure we get the kit tailored to your application if needed. Prices do not include shipping.
The following items are included in the kit:
Main Components:
- 1x HyPer 9 Motor
- 1x HyPer 9 Contactor
- 1x HyPer 9 Wiring harness
- 1x HyPer 9 Motor cradle
- 1x HyPer 9 Throttle pedal
- 1x 6.6kW Charger 1.2kW DC/DC Combo, liquid cooled
- 1x Orion BMS 2 Kit (12 ft cell tap harness)
- 1x SCM2 (simplifies all wiring and installation, efficient diagnostics with central logic control)
- 1x CAN Bus display kit (touch screen shows battery, motor, and controller data)
- 1x CAN Bus display face-plate
- 1x Hawk-IoT WiFi module (includes mobile app)
Wiring Components:
- 2x 90° Flange power connector set (Red)
- 2x 90° Flange power connector set (Black)
- 1x J1772 Port with 1.5M cable
- 1x HV Disconnect
- 1x HV Disconnect gasket
- 1x HV Fuse
- 1x HV Fuse holder
- 30 ft 2/0 AWG Orange high flex HV cable
- 15x 2/0 AWG 5/16" Lug
- 4x 2/0 AWG 3/8" Lug
- 4 ft 1" Wide red heat shrink
- 4 ft 1" Wide black heat shrink
- Deutsch 2 Pin Connector Set (10 Pack)
- Deutsch 3 Pin Connector Set (10 Pack)
- Deutsch 4 Pin Connector Set (10 Pack)
Thermal Management:
- 1x Coolant pump kit
- 1x Coolant pump mount kit
- 1x HyPer controller chill plate
- 2x 1/8" NPT 3/8" barb straight, brass fitting
- 1x Radiator with fan
- 12x 3/8" Barb tee, brass fitting
- 2x 3/8" Barb elbow, brass fitting
- 50 ft 3/8" blue silicone hose
- 5 ft 3/4" blue silicone hose
- 2x 3/4" to 3/8" reducer, brass fitting
Battery Packs:
- Battery options using the Hawkeye high performance 58Ah batteries, in 26.4kWh (3P41S, 123 cells), 35.2kWh (4P41S, 164 cells), or 44kWh (5P41S). These NMC batteries have extremely low voltage sag (higher HP delivered to motor), long life, and superior safety. Battery configurations are completely customizable, these are just sample configurations. Packs include cells and thermal pads. Chill plates must be ordered separately. If you would like assistance designing your battery box, or would like us to build your entire battery assembly, please reach out!
Optional Add-Ons:
- Electric A/C Kit, includes the electric compressor and controller. Works with the SCM2, with data available through the Hawk-IoT mobile app. Compressor speed is adjustable via a knob. Other basic A/C components, A/C hoses/fittings are not included since they are dependent on application.
- Battery Chiller Kit, includes our custom heat exchanger and A/C expansion valve/solenoid. This gets installed into your A/C system to build a 'split' system. The SCM2 will activate the solenoid to be able to chill the batteries only whenever necessary.
- 5kW Battery Preheater Kit, includes the 5kW compact fluid heater and controller, with data available through the Hawk-IoT mobile app. Uses the SCM2 for automated preheating before charging and when discharging in cold temperatures. Heater power is adjustable via a knob.