This CAN bus display kit is all you need for your instrumentation! Designed with simplicity in mind, this kit is very easy to install with your Orion BMS and HyPer 9 Controller. 2 wires for 12V power, and 2 wires for CAN bus, and that's it! The kit includes the display, display controller box, display harness (3 ft), CAN bus harness (6 ft). The display controller will be programmed at a CAN baud rate of 250kbps by default. 125kbps and 500kbps can be programmed by request. For advanced users, the display controller can be reprogrammed to a different CAN speed over CAN bus.

The display has a main info screen, and an additional info screen as shown in the images above. You can toggle between the two by pressing anywhere on the display.

The 'Error' text in red will appear if there is an error present on either the HyPer controller or Orion BMS. The controller error will only appear if it is a stopping or blocking fault level code.

Our new 3.5E Series Display CNC Aluminum Case is available soon in limited quantities here. This Display Case is not included in the kit and is purchased separately.

We also have a HyPer 9 only version of this display. Please see the photos, and can be ordered from the drop down menu. The first two display screenshots are of the standard Orion BMS/HyPer controller version (standard), and the next two screenshots are the HyPer controller only version.

The display is compatible with the Orion BMS and the HyPer 9 Controller, and will display the following info:

BMS:

• SOC

• Pack Current

• Pack Voltage

• Average Cell Voltage

• Average Cell Temperature

• Maximum Cell Voltage

• Maximum Cell Temperature

• Minimum Cell Voltage

• Minimum Cell Temperature

• Error check

Controller:

• RPM

• Motor Temperature

• Controller Temperature

• Error check

Note: Other display sizes are available from 2.4" - 10.1" by special order only, and custom graphics are also available, please contact us for details.